Configuring The Controller Settings - Pan And Tilt Reverse; Turning The Pan Reverse On Or Off; Turning The Tilt Reverse On Or Off - Honeywell ACUIX Installation And Configuration Manual

Configuring the Controller Settings - Pan and Tilt Reverse

Task/Action (with Default)

Turning the Pan Reverse ON or OFF

1. Select 3 Control Options

2 Pan Reverse.
2. Select:
• OFF (default)
• ON so that a left pan command causes the dome to pan
right and vice versa.

Turning the Tilt Reverse ON or OFF

1. Select 3 Control Options

3 Tilt Reverse.
2. Select:
• OFF (default)
• ON so that a tilt up command causes the dome to tilt down
and vice versa.
Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Note Remember you access the OSD by pressing 90

4 Set Pan and Tilt Options

4 Set Pan and Tilt Options

Preset.
Notes
95