Opening The Osd With Special Preset 90; Opening A Submenu Or Selecting A Menu; Exiting Or Escaping From A Menu - Honeywell ACUIX Installation And Configuration Manual

Before You Begin Configuring

Opening the OSD with Special Preset 90

Opening a Submenu or Selecting a Menu

Exiting or Escaping from a Menu

70
Note To access any preset (special or programmed) press [preset number]
Preset button on the controller.
1. Enter a password or skip to step 2.
a. If prompted, enter the 4-digit PIN (the default is 1000) to log in as User Level 1.
Move the joystick up or down to select numbers for each digit. Move the joystick
left or right to move between digits.
b. Press F5 (enter).

2. Press 90
Preset.
The OSD display opens on the monitor.
To open a submenu or select a menu, either:
• Press a number beside the menu option. The numbers either toggle between the
available choices or opens another menu.
• Move the joystick up or down the menu and press F5 (enter).
Note Depending on the protocol used, for example with the HJZTP controller, the
monitor displays different exit instructions.
