Changing The Auto Focus Mode; Setting The Maximum Digital Zoom Magnification Level; Setting The Manual Zoom Speed - Honeywell ACUIX Installation And Configuration Manual

Task/Action (with Default)

Changing the Auto Focus Mode

1. Select 3 Control Options
2. Select:
• Z (default) to auto focus the lens when the zoom setting
changes.
• OFF to manually focus the lens.
• PTZ to auto focus the lens when the pan, tilt, or zoom
positions change.

Setting the Maximum Digital Zoom Magnification Level

Select 5 Camera Options
(default) or 2x or 4x or 12x.
For HDXG, if image stabilization is enabled, the digital zoom is
restricted to 2x.

Setting the Manual Zoom Speed

1. Select 5 Camera Options
Speed.
2. Select a number to set the speed the joystick moves the zoom
lens based on the angle of the joystick is positioned:
• 6 (default)
• 0 is the slowest
• 7 is the fastest
• 8 makes the zoom speed proportional to the angular
position of the joystick control.
Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
 
6 Auto Focus
 
1 Zoom 1 Max Digital Zoom
 
1 Zoom 2 Manual Zoom
Notes
Minimum focus distance is set at 3.3 ft
(1.0 meter) from the camera lens in both
manual and automatic focus mode. When
the zoom is changed it must
automatically focus; optionally when pan,
tilt or zoom is changed it must also auto
focus.

1x Available with all camera models.
Available with camera models HDXA,
HDXJ and HDXF (NOT HDXG).
81