Step 8: Configure The Dome - Honeywell ACUIX Installation And Configuration Manual

Step 8: Configure the Dome

Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
Complete these steps:
1. Review Before You Begin Configuring
2. If applicable, continue setting up and configuring other custom settings including
camera specific configurations, mimic tours, presets, privacy zones and preset
tours using the on-screen display (OSD) and controller. See
73.
3. If required or applicable, proceed to user configurations based on other hardware,
for example, RapidEye.
on page 63.
Configuration on page
61