Programming Preset Tours; Turning Preset Tour Auto Focus On Or Off; Setting Preset Auto Focus - Honeywell ACUIX Installation And Configuration Manual

Configuration
Task/Action with Default

Programming Preset Tours

1. Select 6 Function Programming
2. Select a preset tour NUM (number) to program.
3. Select each Preset already programmed to use in the preset
tour.
4. Select a Velocity between each preset (1 to 480/s).
The default is 360°/second.
5. Select a Dwell time for how long the dome waits before it goes
to the next preset in the list. Select from 1 to 99 seconds.
6. Select S to save, E to exit or D to delete.

Turning Preset Tour Auto Focus ON or OFF

1. Select 3 Control Options
2. Select:
• OFF (default) to prevent auto focusing during preset tours
and allows the lens to focus based on the stored preset
position; that is, the lens does not attempt to focus while
moving between presets.
• ON to auto focus the lens on each preset while running a
preset tour.
Note: Preset Tour Auto Focus is automatically turned ON
when Option 8 Preset Auto Focus is turned ON. As long
as Preset Auto Focus is ON, Preset Tour Auto Focus
cannot be turned OFF.

Setting Preset Auto Focus

1. Select 3 Control Options
2. Select:
• OFF (default) turns off auto focusing.
• ON to auto focus the lens on each preset.
100

2 Program a Preset Tour.

7 Preset Tour Auto Focus.

8 Preset Auto Focus.
Notes
Inserting presets: To insert a preset
between presets, position the cursor on
the second preset and press Focus (+)
to insert a line.
Deleting presets: To delete a preset,
place the cursor on the preset line and
press Focus (-). The entire preset line is
deleted.
Program Preset Tour
NUM PRESET VELOCITY DWELL
1 -- ---
2 -- ---
3 -- ---
4 -- ---
5 -- ---
6 -- ---
7 -- ---
D = Delete E = Exit S = Save
When Preset Auto Focus is turned ON,
option 7 Preset Tour Auto Focus is also
automatically turned ON. In this mode,
Preset Tour Auto Focus cannot be turned
OFF.
--
--
--
--
--
--
--