Setting The Auto Slow Shutter Limit; Turning Wide Dynamic Range (Wdr) On Or Off; Turning Interlace Scanning On Or Off; Turning Image Stabilization (Eis) On Or Off - Honeywell ACUIX Installation And Configuration Manual

Configuration
Task/Action with Default (HDXG Camera Models Only)

Setting the Auto Slow Shutter Limit

1. Select 5 Camera Options
Shutter Lim.
2. Select NTSC options: 1/60, 1/30, 1/15, 1/8, 1/4 (default), 1/2

Turning Wide Dynamic Range (WDR) ON or OFF

1. Ensure Auto Iris Mode is ON.
2. Select 5 Camera Options

Dynamic Range ON or OFF (default).

Turning Interlace Scanning ON or OFF

1. Select 5 Camera Options
Scanning.
The message This will Disable WDR & Motion
Detection. Are you sure that you want to do
this? displays.
2. Select Y (yes) to continue and N (no) to cancel.
3. Select ON to disable the WDR and motion detection features or
OFF (default) to keep these features enabled.

Turning Image Stabilization (EIS) ON or OFF

1. Select 5 Camera Options
The message This will Disable Interlace Scanning
and Image Stabilization. Are you sure that you
want to do this? displays.
2. Select Y (yes) to continue or N (no) to cancel.
3. Select ON or OFF (default). If set to ON, the motion detection
feature is disabled.
90
 
3 Video Setup 5 Auto Slow
 
3 Video Setup 6 Wide
 
3 Video Setup 7 Interlace

8 Image Stabilization.
Notes
HDXG cameras only.
HDXG cameras only.
HDXG cameras only.
When EIS is enabled, the digital zoom is
limited to 2x.
HDXG cameras only.