Turning Nightshot (Tdn) On Or Off; Activating Nightshot (Tdn); Deactivating Nightshot (Tdn) - Honeywell ACUIX Installation And Configuration Manual

Task/Action (with Default)

Turning NightShot (TDN) ON or OFF

1. Set NightShot to MAN mode.
2. Select 5 Camera Options

NightShot ON to manually moves the IR block filter in and
out or OFF.

Activating NightShot (TDN)

1. Set NightShot mode to Auto.
2. Select 5 Camera Options
Activate NightShot.
3. Toggle between the available gain and shutter speed values.
a. Gain Settings
• 0dB, 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB, 16dB,
18dB, 20dB (default), 22dB, 24dB, 26dB, 28dB.
b. Shutter Speed Settings
• PAL = 1/3 sec, 1/6 sec, 1/12 sec, 1/25 sec, or 1/50 sec.
• NTSC = 1/4 sec, 1/8 sec, 1/15 sec, 1/30 sec, or 1/60
sec.

Deactivating NightShot (TDN)

1. Select 5 Camera Options
Deactivate NightShot.
Toggle between the available gain and shutter speed values.
a. Gain Settings
• 0dB (default), 2dB, 4dB, 6dB, 8dB, 10dB, 12dB, 14dB,
16dB, 18dB, 20dB, 22dB, 24dB, 26dB, 28dB.
b. Shutter Speed Settings
• PAL = 1/3 sec, 1/6 sec, 1/12 sec, 1/25 sec, or 1/50 sec.
• NTSC = 1/4 sec, 1/8 sec, 1/15 sec, 1/30 sec, or 1/60
sec.
Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
 
3 NightShot Control
 
3 NightShot Control
 
3 NightShot Control
Notes
Available with camera models HDXJ,
HDXF and HDXG (NOT HDXA).
2
Note Wide dynamic range (WDR) is
automatically turned OFF when
NightShot is turned on; WDR is
turned back ON when NightShot
is OFF, if WDR was turned ON
previously.
Available with camera models HDXJ,
HDXF and HDXG (NOT HDXA).
3
Keep the activation and deactivation
settings slightly apart to ensure that there
is always some deadband between the
activate and deactivate levels. The
amount of deadband can be adjusted to
prevent the dome from oscillating
between the NightShot activated and
deactivated modes.
4 Available with camera models HDXJ,
HDXF and HDXG (NOT HDXA).
83