Prg - Program Flash - GE 68K System User Manual

68K System Monitor
User's Guide

PRG - Program Flash

o
CPM
Platform
Use this command to program a FLASH memory.
Description
Below is usage and syntax information for this command
Syntax
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
prg [/(b | w | l)] address data
/b = bytes (octets), the default mode
/w = words
/l = long words
address = address at which to store the data, in hexadecimal
data = the data to store
Not Required
Use with great care. Command will change contents of Flash
memory without updating checksum.
SWM0023-1.00 -2
o þ
D20/200 D20/200 ME
CCU Base CCU Base
GE Energy Services
o
D25
3-49