Rtb - Return To Bootrom - GE 68K System User Manual

68K System Monitor
User's Guide

RTB - Return To BootROM

o
CPM
Platform
Use this command to place the device in System Service Mode. When you issue the
Description
command, the system stops executing out of the FLASH region, and it activates the
BootROM operating system.
The primary use of this mode is for the downloading of FLASH application software
to the RTU.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
rtb
None
None
At the monitor prompt, type rtb and press
Results: The system returns to BootROM operation mode.
The system halts and deletes all applications currently
executing on the RTU when it activates the BootROM
operating system.
SWM0023-1.00 -2
o o
D20/200 D20/200 ME
CCU Base CCU Base
ENTER
GE Energy Services
þ
D25
.
3-61