Cb - Clear Breakpoint - GE 68K System User Manual

GE Energy Services

CB - Clear Breakpoint

þ
CPM
Platform
Use this command to clear breakpoints that are currently set.
Description
•
By specifying a breakpoint number, this command clears that breakpoint.
•
By not specifying a breakpoint, it clears all defined breakpoints.
Breakpoints are cleared by:
1. replacing the 68000 family TRAP instruction with the original instruction, and
then
2. clearing the entry in the breakpoint table
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
3-10
þ o
D20 D20 ME
D20 Base D20 Base
cb [break_pt#]
None
break_pt# = breakpoint number; default is all breakpoints
Type cb 3 and press
This clears breakpoint number 3.
Results: The system displays the prompt.
None
SWM0023 1.00 2
68K System Monitor
o þ
D20/200 D20/200 ME
CCU Base CCU Base
.
ENTER
User's Guide
þ
D25
General
Full Release