Test - Invoke Test Tool - GE 68K System User Manual

GE Energy Services

TEST - Invoke Test Tool

o
CPM
Platform
Use this command to activate a test tool external to the monitor.
Description
To use a test tool, the test tool application must:
•
be included in the software for the system, and
•
be created specifically to make use of this monitor function.
The 68K Monitor relinquishes communications control to the test tool and waits for
the tool to complete its processing before continuing.
Below is usage and syntax information for this command
Syntax
Command Format
Variables
Parameters
Example
Special
Considerations
3-78
o o
D20 D20 ME
D20 Base D20 Base
test proc_name
None
proc_name = The name of the test tool process, normally
None Required
If the test tool application is suspended, the command will not
function.
The monitor must detect that the test tool is waiting for a signal
before it will proceed.
SWM0023 1.00 2
o þ
D20/200
CCU Base
Txxx.
68K System Monitor
User's Guide
þ
D20/200 ME D25
CCU Base
General
Full Release