Boot - Startup - GE 68K System User Manual

68K System Monitor
User's Guide

BOOT - Startup

-
þ
CPM
Platform
Use this command to remove all defined Monitor breakpoints and then force the
Description
system to go through its lowest level start-up.
This ensures that the system is properly re-initialized after testing, system
manipulating, or downloading.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
þ þ
D20 D20 ME
D20 Base D20 Base
CPM / D20 / D20ME / CCU/ CCUME
D25
delay = number of milliseconds to wait before the boot is
performed
/i = skip all additional system processing and reset
the system immediately
Type boot and press
Results: The system responds with the normal boot-up screen.
It displays a series of messages relating to hardware
and software initialization.
This command will automatically clear all breakpoints before
execution.
This command causes all processors in a multi-processor
system to reboot.
SWM0023-1.00 -2
þ þ
D20/200 D20/200 ME
CCU Base CCU Base
boot
boot [/i] [delay]
.
ENTER
GE Energy Services
þ
D25
3-7