Pr - Profile - GE 68K System User Manual

68K System Monitor
User's Guide

PR - Profile

þ
CPM
Platform
Use this command to display run-time statistics of all processes in the system,
Description
including:
•
the number of times the process was swapped in
•
the number of system real-time clock ticks occurring during its run periods
•
the average number of ticks (in tenths of a tick) per run (average)
•
the CPU usage (in 10
•
the maximum period between watchdog process operations.
Note:
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
General
Full Release
þ þ
D20 D20 ME
D20 Base D20 Base
ths
of percent) of the process
Each clock tick is one millisecond.
CPM / D20M
CCU / CCUME / D25
/p =
/r =
/t =
None
Type pr /r and press
Results: The command resets the counts associated with
process profiling and watchdog run period.
The system displays any specified data and then
returns the prompt
SWM0023-1.00 -2
þ þ
D20/200
CCU Base
pr / (p | r)
pr / (p | r | t)
print the process profile
reset process profile counts
print the process profile in the sequence of CPU
usage percentage
.
ENTER
GE Energy Services
þ
D20/200 ME D25
CCU Base
Continued on next page
3-47