Cf - Copy File - GE 68K System User Manual

68K System Monitor
User's Guide

CF - Copy File

o
CPM
Platform
Use this command to copy file information from one file to another.
Description
Primarily, use the command to transfer files containing configuration, application
FLASH and DSP FLASH program data into their destination regions.
Also, use it to copy any one file to another, depending on the support for copying
provided by the File System Driver that owns the files.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
cf source_file [destination_file]
None
source_file = The name of the file containing the source
destination_file
= The name of the file into which the source file
Type cf flash.zlb and press
Results: The monitor copies the file flash.zlb into Flash
EPROM.
Once invoking this function, it may take some time for the
command to write the file into its destination; especially if it
consists of compressed configuration or FLASH program
information (DSP or application).
SWM0023-1.00 -2
þ o
D20/200
CCU Base
data. This is always required, and is the full
path name of the file. If the operation is
transferring configuration or FLASH program
information (DSP or application), then only
the source name is required.
data is to be copied. If you intend to copy
configuration or FLASH program
information (DSP or application) into its
destination region, this name is optional and
unnecessary
.
ENTER
GE Energy Services
þ
D20/200 ME D25
CCU Base
3-15