Cp - Change Priority - GE 68K System User Manual

68K System Monitor
User's Guide

CP - Change Priority

o
CPM
Platform
Use this command to change the current priority of an existing process.
Description
Below is usage and syntax information for this command
Syntax
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
cp (/h | ((pid | PName) (delta | abs)))
/h = display help
pid = PID number
PName = name of the process
delta = the priority change to be made.
A negative value reduces priority.
A positive value adds priority.
abs = the final priority of process after change in Hex
Type cp WES0 +20 and press
Results: The monitor increases the priority of process WES0
by (delta) 0x20.
Note: Process/Task names, like WES0, are case-sensitive.
If you use this command to change the priority of the IDLE
process, the system will reboot.
SWM0023-1.00 -2
o þ
D20/200 D20/200 ME
CCU Base CCU Base
.
ENTER
GE Energy Services
þ
D25
3-17