Img - Display Image Information - GE 68K System User Manual

68K System Monitor
User's Guide

IMG - Display Image Information

o
CPM
Platform
Use this command to display information on the BootROM, FLASH, and NVRAM
Description
configuration images.
The information consists of:
For the BootROM and FLASH images, a description string and a part number;
For the NVRAM configuration, the static CRC and configuration version.
Note:
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o þ
D20 D20 ME
D20 Base D20 Base
If any of this information is not available, the monitor will display a
message indicating this in place of the expected information.
Because the IMG command only displays information entered into the
MODULE.MAK file used in the SDS system, any omissions or mistakes in
the MAK file will be reflected in the output of this command.
img
None
None
Type img and press
Results: The monitor displays information on the FLASH,
BootROM, and configuration images currently
active in the system.
None
SWM0023-1.00 -2
o þ
D20/200 D20/200 ME
CCU Base CCU Base
.
ENTER
GE Energy Services
þ
D25
3-41