Qp - Query Process - GE 68K System User Manual

68K System Monitor
User's Guide

QP - Query Process

þ
CPM
Platform
Use this command to display the:
Description
•
general status of all currently active processes
•
general status of specific processes, or
•
detailed information about one currently active process.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
General
Full Release
þ þ
D20 D20 ME
D20 Base D20 Base
CPM / D20 / D25:
CCU / CCUME:
None
(none) = display general status information for all
processes.
pid = pSOS process ID (in hexadecimal); display
detailed information for a specific process.
gpid = global pSOS process ID (in hexadecimal);
display detailed information for a specific
process.
name = case-sensitive process name. Supports the new
process naming convention. To display an entire
name, enter detailed information for that process.
If you enter the first few characters, the
command attempts pattern matching. The
monitor displays general or detailed information
depending on the number of matches.
Type qp and press
Results: The system displays process information about all
active processes, and then returns to the prompt.
SWM0023-1.00 -2
þ þ
D20/200 D20/200 ME
CCU Base CCU Base
qp [(pid | name)]
qp [(pid | gpid | name)]
.
ENTER
GE Energy Services
þ
D25
Continued on next page
3-51