GE 68K System User Manual page 91

68K System Monitor
User's Guide
RZ - ZMODEM Download,
Executing this command modifies the memory of the D25, and can cause operational
!
disruption.
WARNING
Use caution before proceeding. Be sure that you really want to use this command
and that you use it correctly.
When using ZMODEM, all files sent to the 68K Monitor must have file names.
K K
K K
Note
The file name for a FLASH image must start with "PROM". The file name for a
ZLIB compressed image must end with the extension ".ZLB".
The name in these cases is case insensitive (i.e. "prom" and ".zlb" are acceptable as
well). The monitor assumes that any other names are non-compressed NVRAM
configuration data.
Since there is no addressing inherent in ZMODEM data, you must change the
location of NVRAM in any existing configuration before downloading if you want to
change the NVRAM header address.
General
Full Release
Continued
SWM0023-1.00 -2
GE Energy Services
3-65