Dhw - Display Hardware Data - GE 68K System User Manual

GE Energy Services

DHW - Display Hardware Data

o
CPM
Platform
Use this command to display information on the hardware configuration of the D25.
Description
The provided information consists of:
•
size and base address of all memory regions
•
DSP and XCOM type
•
state of the auxiliary output and sysfail signal, and
•
EPLD and PCB revision numbers.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
3-24
o o
D20 D20 ME
D20 Base D20 Base
dhw
None
None
Type dhw and press
Results: A comprehensive list of hardware and memory
information is displayed.
None
SWM0023 1.00 2
68K System Monitor
o o
D20/200 D20/200 ME
CCU Base CCU Base
ENTER
User's Guide
þ
D25
General
Full Release