Sb - Step Breakpoint - GE 68K System User Manual

GE Energy Services

SB - Step Breakpoint

þ
CPM
Platform
Use this command to single step a process that was suspended at a breakpoint.
Description
It also allows executing multiple program steps in a single command.
Below is usage and syntax information for this command
Syntax
Command Format
Variables
Parameters
Example
Special
Considerations
3-68
þ o
D20 D20 ME
D20 Base D20 Base
sb break_pt# [#instructions]
None
break_pt# = breakpoint number as returned with the define
#instructions = number of additional instructions to execute
Type sb 2 1 and press
This allows the process defined by the breakpoint number of 2
to perform two program instructions.
Results: The system responds with the prompt. Additionally,
each time it completes a program step, the system
displays the breakpoint number, instruction count,
and register values. If the instruction count is greater
than zero, it is decremented. Otherwise, the process is
suspended.
None
SWM0023 1.00 2
o þ
D20/200
CCU Base
breakpoint command.
prior to stopping; default is zero.
.
ENTER
68K System Monitor
User's Guide
þ
D20/200 ME D25
CCU Base
General
Full Release