GE 68K System User Manual page 57

68K System Monitor
User's Guide
E - Edit Memory,
Syntax (continued)
Parameters
Example
Special
Considerations
General
Full Release
Continued
address =
Type e /l 200000 and press
This indicates that you are editing RAM memory, starting at
address 200000 hexadecimal in long word format.
Results: The system continues to display the current address
•
An attempt to display non-existent memory or modify
EPROM memory results in a bus error.
•
You may modify systems with FLASH EPROM such as
the D25 and CCUME using this command.
SWM0023-1.00 -2
address to edit in hexadecimal notation
ENTER
location and data at that location in hexadecimal
format, until you use a period (.) to return the monitor
prompt.
GE Energy Services
.
3-31