Ft - Find Table - GE 68K System User Manual

GE Energy Services

FT - Find Table

þ
CPM
Platform
Use this command to search available Database Manager resources to obtain the
Description
address and number of records in a database table within the database management
system.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
3-38
þ þ
D20 D20 ME
D20 Base D20 Base
ft table_name
None
table_name = name of the database table to locate (not
Type ft p097cpro and press
to locate the P097CPRO table in the database.
Results: The monitor displays the hexadecimal format address
and decimal format number of records in the
specified table.
It displays zeros for the address and number of
records if it does not find the table.
This command may not function if NVRAM is corrupted. This
is because the NVRAM header inside the D25 contains the
location of the root table of the Database Manager and all of
the table identification blocks.
SWM0023 1.00 2
þ þ
D20/200
CCU Base
case-sensitive).
.
ENTER
68K System Monitor
User's Guide
þ
D20/200 ME D25
CCU Base
General
Full Release