Sp - Suspend Process - GE 68K System User Manual

GE Energy Services

SP - Suspend Process

þ
CPM
Platform
Use this command to stop all unprotected processes, some unprotected processes, or
Description
a specific unprotected process.
Use this command to stop all processes before CPU-intensive operations, for
example, an NVRAM download.
Protected processes must remain running at all times. Protected processes include:
•
MON
•
MOUT
•
WDOG
•
ROOT
•
IDLE
•
LGIN
•
iSCS processes, including B100 and file managers.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
3-72
þ þ
D20 D20 ME
D20 Base D20 Base
monitor input process
monitor output process
watchdog process
root process
pSOS idle process
boot login process (in some cases)
CPM / D20 / D25:
CCU / CCUME:
None
(none) = suspend all unprotected processes.
pid = pSOS process ID (in hexadecimal); suspend a
specific process.
gpid = global pSOS process ID (in hexadecimal);
suspend a specific process.
name = case-sensitive process name. The monitor
supports the new process naming convention.
If you enter an entire name, a specific process is
suspended. If you enter the first few characters,
the command attempts pattern matching. All
matching processes are suspended.
SWM0023 1.00 2
68K System Monitor
þ þ
D20/200 D20/200 ME
CCU Base CCU Base
sp [(pid | name)]
sp [(pid | gpid | name)]
Continued on next page
User's Guide
þ
D25
General
Full Release