Exit - Exit - GE 68K System User Manual

GE Energy Services

EXIT - Exit

þ
CPM
Platform
Use this command to perform a limited clean up of the 68K Monitor, and return to
Description
the calling routine (such as WESMAINT) if it has not been suspended.
Below is usage and syntax information for this command
Syntax
Command Format
Variables
Parameters
Example
Special
Considerations
3-36
þ þ
D20 D20 ME
D20 Base D20 Base
exit
None
None
Type exit and press
Results: The monitor returns control to the calling routine.
The task that started the 68K Monitor must still exist and be
running (i.e. not suspended).
This command automatically clears all active breakpoints but
does not perform any other clean-up operations. This means
that if you enable debug mode, if something has suspended
processes, or any other system alterations made, they will
remain in effect even after exiting the monitor.
SWM0023 1.00 2
þ þ
D20/200 D20/200 ME
CCU Base CCU Base
.
ENTER
68K System Monitor
User's Guide
þ
D25
General
Full Release