Cca - Change Configuration File Attributes - GE 68K System User Manual

68K System Monitor
User's Guide

CCA - Change Configuration File Attributes

o
CPM
Platform
Use this command to modify the configuration file attributes for a given
Description
configuration file.
Overwrites the old attributes with the new attributes.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
cca file_num
None
file_num = The query configuration storage parameters
command displays all existing files, giving each
a numerical index. Use this index with this
command to specify the affected file.
Type cca 1 and press
see below
When this command is invoked, the user is provided with the
current attributes of the file using the characters:
•
'c' (currently selected file)
•
'o' (opened), and
•
'r' (corrupt).
The user is expected to enter the attributes to change by typing
the character representing the attribute ('c', 'o', or 'r') followed
by '+' to add it or '-' to remove it.
The same command can change any of the attributes. You can
enter the same attribute multiple times, but only the last entry
will take effect. You can separate each attribute by a space, but
do no separate the attribute and its add/subtract character, and
any other characters on the command line will result in an
error.
SWM0023-1.00 -2
þ þ
D20/200 D20/200 ME
CCU Base CCU Base
.
ENTER
GE Energy Services
þ
D25
3-11