Qx - Query Exchange - GE 68K System User Manual

GE Energy Services

QX - Query Exchange

þ
CPM
Platform
Use this command to display information on system exchanges.
Description
•
If you request information on more than one exchange, then the output is in a list
format. Each line contains an exchange name and ID, and the number of
processes and messages queued.
•
If you request information on all exchanges, the monitor derives and displays the
number of free exchange control blocks.
•
If you request information on a single exchange, then the monitor will display a
more detailed description. The description includes the:
−
−
−
−
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
3-54
þ þ
D20 D20 ME
D20 Base D20 Base
exchange name
queuing mechanism (FIFO or priority)
access rights (group only or unlimited), and
queue length (unlimited or decimal notation limit), followed by a list of:
all queued processes, and
all queued messages.
CPM / D20 / D25:
CCU / CCUME:
None
(none) =
xid =
gxid =
name =
SWM0023 1.00 2
þ þ
D20/200
CCU Base
qx [(xid | name)]
qx [(xid | gxid | name)]
displays general information for all exchanges.
pSOS exchange ID (in hexadecimal); displays
detailed information for a specific exchange.
global pSOS exchange ID (in hexadecimal);
displays detailed information for a specific
exchange.
case-sensitive exchange name. It now supports
the new exchange naming convention.
If you enter an entire name, the monitor displays
detailed information for that exchange.
If you enter the first few characters, the
command attempts pattern matching. The
monitor displays general or detailed information,
depending on the number of matches.
68K System Monitor
User's Guide
þ
D20/200 ME D25
CCU Base
Continued on next page
General
Full Release