Sc - Select Active Configuration - GE 68K System User Manual

68K System Monitor
User's Guide

SC - Select Active Configuration

o
CPM
Platform
Use this command to select one of the stored configurations as the active
Description
configuration.
The system is halted and the stored configuration is uncompressed (if necessary) and
written into NVRAM (local on the D25, global on a D200) as the new configuration.
The selected configuration file is marked as the active configuration.
Note:
Below is usage and syntax information for this command
Syntax
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
Upon completion, the Monitor leaves the system halted so that you can
restart the system with the new configuration.
sc (file_num | file_name) [BaseAddress]
None
file_num
file_name
BaseAddress = base address at which to write the new
Type sc config.bin and press
Results: The monitor selects the stored configuration
"config.bin" as the active configuration and copies it
into NVRAM, overwriting the existing configuration.
Once this function is invoked, it may take some time for the
configuration to be decompressed (if necessary), and written
into memory.
SWM0023-1.00 -2
þ þ
D20/200
CCU Base
= The query configuration storage parameters
command displays all existing files, giving
each a numerical index. The monitor uses this
index with the command to specify the file
that it will copy into memory and make
active.
= The name of the configuration file to select.
The command will select the first matching
configuration it finds.
configuration
.
ENTER
GE Energy Services
þ
D20/200 ME D25
CCU Base
3-69