Section 2: Monitor Commands; Al - Change Auto-Logout Timer - GE 68K System User Manual

GE Energy Services
Section 2: Monitor Commands

AL - Change Auto-logout Timer

o
CPM
Platform
Description Use this command to change the monitor's auto-logout timer duration from the
default of 5 minutes.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
3-4
o o
D20 D20 ME
D20 Base D20 Base
al timout (minutes)
None
minutes = 0 to 32767 minutes. '0' disables the timer.
Type al 15 and press
Results: The monitor will log out after 15 minutes of
inactivity.
If the timer is disabled, (set to '0') the monitor can be locked-
out for any other user.
SWM0023 1.00 2
68K System Monitor
þ þ
D20/200 D20/200 ME
CCU Base CCU Base
.
ENTER
User's Guide
þ
D25
General
Full Release