GE 68K System User Manual page 78

GE Energy Services
QP - Query Process,
Syntax (continued)
Special
Considerations
Information The response to all QP commands will include:
Details
•
process name
•
process ID
•
group ID
•
priority
•
current run state
The response to QP commands that specify processes will include:
•
received signals
•
time slice
•
run ticks
•
run count
•
owned memory segments
•
register values at the time of the last swap
Current Run This table lists the states that the processes may be in at any time:
State
In this state...
Multi-Processor For a multi-processor system, this command displays:
Displays
•
a specific global process' summary consisting of its node and local pid, or
•
the process summary of all local processes to the node, and all global processes
in the system.
3-52
Continued
All numeric data displayed is in hexadecimal notation.
Await is spawned but not activated.
Vwait is waiting for a pSOS signal.
Xwait is waiting for a message from another process to arrive at an
exchange.
Paused has sent a 'pause' request to processor.
Suspended has been spawned and activated, but is not running.
•
This state may be a normal condition, or may indicate a
fatal configuration or system error. Check the
WESMAINT Logger to verify.
SWM0023 1.00 2
68K System Monitor
the process...
User's Guide
General
Full Release