El - Error Log - GE 68K System User Manual

68K System Monitor
User's Guide

EL - Error Log

þ
CPM
Platform
Use this command to display and delete system error log entries stored in NVRAM
Description
for a single or multi-processor system.
The display command also presents the current system state, and any significant low-
level system errors which occur.
The delete function deletes system error log entries from memory, and clears the
disabled state if the system is in a disabled state.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
þ þ
D20 D20 ME
D20 Base D20 Base
CPM / D20
D20ME / CCU / D25
/p = print the error log entries
/r = reset (delete) the error log entries
/f = fix an error log that contains an infinite loop
None
Type el /p and press
Results: This command displays the error log entries
maintained by the system and the system state.
The system returns the prompt when it completes this
instruction
None
SWM0023-1.00 -2
þ þ
D20/200 D20/200 ME
CCU Base CCU Base
el / (p | r)
el / (p | r | f)
.
ENTER
GE Energy Services
þ
D25
3-33