Pb - Print Breakpoint - GE 68K System User Manual

GE Energy Services

PB - Print Breakpoint

þ
CPM
Platform
Use this command to display breakpoint information about any or all-active
Description
breakpoints in the system.
While the system suspends a process at a breakpoint, this instruction causes the
display of the suspended process ID and the register values when it encounters the
breakpoint. These values differ from those printed with the query process command,
as the latter prints the values at the time of the last process swap.
Syntax Below is usage and syntax information for this command
Command Format
Variables
Parameters
Example
Special
Considerations
3-46
þ o
D20 D20 ME
D20 Base D20 Base
pb [break_pt#]
None
break_pt# = breakpoint number as returned with the
Type pb and press
Results: If the system encounters a breakpoint, it responds
with a list of all active breakpoints in the system and,
the process ID, loop count, and register values, in
hexadecimal.
It then displays the prompt without affecting the state
of any breakpoint.
None
SWM0023 1.00 2
o þ
D20/200
CCU Base
defined breakpoint command.
.
ENTER
68K System Monitor
User's Guide
þ
D20/200 ME D25
CCU Base
General
Full Release