Eth - Ethernet Address - GE 68K System User Manual

68K System Monitor
User's Guide

ETH - Ethernet Address

o
CPM
Platform
Use this command to change the Ethernet address of a D25's hardware interfaces.
Description
Below is usage and syntax information for this command
Syntax
Command Format
Variables
Parameters
Example
Special
Considerations
General
Full Release
o o
D20 D20 ME
D20 Base D20 Base
eth /(d | u) [b1 b2 b3 b4 b5 b6]
/d = display address
/u = update address
[b1 b2 b3 b4 b5 b6] = 6 byte Ethernet address
Nor required
Do not use unless qualified.
Address change is permanent, and will stay in D25 XCOM
hardware even if moved to another D25.
SWM0023-1.00 -2
o o
D20/200 D20/200 ME
CCU Base CCU Base
GE Energy Services
o
D25
3-35