Explanation Of The Start Parameter -Aspect - Fujitsu Siemens Computers pmn User Manual

Operating and monitoring CentricStor
Parameter
-user
1
The command line arguments -aspect, -autoscan, -lang, -size have priority over values already stored in a profile
file.
To start in User mode, use:
To start in Observe mode, use:
5.3.2.1

Explanation of the start parameter -aspect

The argument of this parameter has the format {[=][WxH]+|-X+|-Y}
Where:
WxH
+X
-X
+Y
-Y
Examples: -aspect 500x400-100-100; -aspect 500x400; -aspect +100+100
i
!
U41117-J-Z125-7-76
Meaning
Starts the application in User
mode
The window is displayed on the screen with a width of W pixels and a height of H pi-
xels.
Distance of the left-hand window margin from the left edge of the screen in pixels
Distance of the right-hand window margin from the right edge of the screen in pixels
Distance of the upper window margin from the upper edge of the screen in pixels
Distance of the lower window margin from the lower edge of the screen in pixels
It is possible that the specification W and / or H will be ignored by the application.
CAUTION!
Knowledge of the screen setting is required to use X and Y since if values which are
too high are specified, the window will be displayed partly or completely outside the
visible area.
gxcc <other parameters> &
or
GXCC -user <parameters> &
GXCC -observe <parameters> &
Starting GXCC
Comment
If not specified: User mode
97