Fujitsu Siemens Computers pmn User Manual page 345

XTCC
If you require individual profile settings, you should define separate profile settings. The
profile data is saved in a matrix format: A directory is set up for each profile name, including
"default".
Directory:
CentricStor A
CentricStor B
CentricStor C
CentricStor D
Profile data is stored in this directory for each unit under the name <system_name>.opt.
When changing unit, the current settings are saved under the old unit name. The directory
is then searched to determine whether there is already data for the new unit. If this is the
case, this data is used for control purposes, with the exception of any predefined command
line arguments mentioned above. Otherwise the existing settings are adopted, and these
will be saved when the system is terminated or when the unit is changed again.
U41117-J-Z125-7-76
default.prf Name1.prf
CentricStor_A.opt CentricStor_A.opt
CentricStor_B.opt CentricStor_B.opt
CentricStor_C.opt CentricStor_C.opt
CentricStor_D.opt CentricStor_D.opt
Name2.prf Name3.prf
CentricStor_A.opt CentricStor_A.opt
CentricStor_B.opt CentricStor_B.opt
CentricStor_C.opt CentricStor_C.opt
CentricStor_D.opt CentricStor_D.opt
Function bar
345