Fujitsu Siemens Computers pmn User Manual page 483

Explanation of console messages
SXPS006 PLS(#4006) ERROR: <robot error message>
Meaning
A general robot error which is not necessarily traceable to a device or a cassette.
The meaning of the error message can be found in the relevant robot documentation.
Response
The robot error messages are mostly self-explanatory.
Typical reasons for errors include:
Communication errors:
●
–
–
–
–
–
–
Robot problems
●
–
–
–
Notify maintenance staff.
SXPS007 PLS(#4007):ERROR: <PDS-name>: <robot error message>
Meaning
The robot is experiencing difficulties loading or unloading the device designated by the PDS
number.
Response
Notify maintenance staff.
SXPS008 PLS(#4008) ERROR: 'vsn' <robot error message>
Meaning
The robot has difficulty loading or unloading the cassette described by 'vsn'.
Response
Check the cassette described by 'vsn'. There may be a problem in reading the barcode.
SXPS096 PLS(#996) NOTICE: Stop `PLS-name` for Maintenance
Meaning
The PLS `PLS-name` was stopped via the GUI.
U41117-J-Z125-7-76
LAN connection to the AMU PC or ACSLS server is defective
Incorrect IP address for the AMU PC or ACSLS server in the VLP
Incorrect IP address for the VLP in the AMU PC (Check of file \mptn\etc\hosts
in AMU-PC)
There is no address for the AMU PC or ACSLS server in the VLP's /etc/hosts
There is no system name (SYSNAME in vtls.conf) in the VLP's /etc/hosts
Client not defined in robot software (AMU-PC, LMF Lite Server)
Error in the configuration file of the AMU PC (in the case of ADIC-AML robots)
Cartridge is jammed
Cartridge has fallen out of the grab attachment, etc.
Message lines
483