Command Line Tool For Generating The History Data - Fujitsu Siemens Computers pmn User Manual

History diagrams

7.7.8 Command line tool for generating the history data

The shell script get_hist.sh was created to permit the history data of a CentricStor system to
be made available in a text format (e.g. for the spreadsheet program Excel).
This script is contained in the /usr/apc/bin directory. It can be used to analyze the cur-
rent history data of the system on which it is called (Case a), or the imported data of a fo-
reign system (Case b).
In Case a) the script can be called on any ISP of the CentricStor system concerned. The
same applies for Case b) if the imported history files were saved on the RAID. Otherwise
get_hist.sh must be called on the computer whose local hard disk contains the files.
The script's output is directed to stdout and can consequently be written to the histo-
ry.csv file (the file name is arbitrary) by adding the suffix >history.csv to the script call.
The script call has the following format:
get_hist.sh
Explanation:
The history type must be specified as the 1st parameter. This specification corresponds to
clicking on an object in the Globstat window in the case of graphical output.
The following history types are supported:
History type
cache
escon
Fc
ficon
pmount
tape
tapepool
total
vmount
316
<history-type> <additional-parameter>
Corresponds to clicking on the following in the Globstat window
A cache in the Virtual Components subwindow
A channel in an ESCON graphic in the Performance subwindow
A channel in an FC graphic in the Performance subwindow
A channel in a FICON graphic in the Performance subwindow
A PDS box in the Physical Components subwindow
A device in the DEVICES graphic in the Performance subwindow
A tape pool in the Physical Components subwindow
The bar in the TOTAL graphic in the Performance subwindow
An emulation box in the Virtual Components subwindow
Global Status
U41117-J-Z125-7-76