Online Manual - Fujitsu Siemens Computers pmn User Manual

GXCC
6.2.10.7

Online Manual

This function starts a PDF reader and the most up-to-date version of the manual which is
available is displayed in the language set. If no manual is available in the language set this
menu item is omitted. When GXCC connects with a CentricStor, any more up-to-date
version of the manual which is present there is automatically transferred and enabled.
One of the menu items
– CentricStor Vm.n User Guide (complete)
– CentricStor Vm.n User Guide (GUI Part)
is displayed if
– GXCC is running in User or Observer mode and
– a PDF file is available which matches the CentricStor Version m.n and the selected
language.
In User mode the local documentation is updated by GXCC when either a new connection
is set up or the language is changed and a more recent version is found on the partner
system. In this case a more recent "User Guide (GUI Part)" has priority over an older "User
Guide (complete)". The user is notified of the change by a message. In Observe mode this
function is not available because of the absence of the password, and this is also the case
in Simulation mode.
If new software is only activated with a delay (this only happens interactively, see the
"GXCC Update/Revert Tool" on page
than the GXCC/XTCC software.
U41117-J-Z125-7-76
When GXCC connects with an InfoBroker the latter checks whether it has more
recent versions of the online manuals on its system. After transfer of a more recent
software version the manuals are also transferred to the GXCC computer if
required. Once the transfer has been completed successfully the new manuals are
enabled automatically.
159) the manual may temporarily be more up-to-date
Function bar
section
235