Centricstor Service Manual - Fujitsu Siemens Computers pmn User Manual

XTCC
8.3.7.6

CentricStor Service Manual

One of the menu functions
– CentricStor Service Manual (complete)
– CentricStor Service Manual (GUI Part)
is offered if
– XTCC is operated in Service or Simu mode,
– the monitored system is of the type "CentricStor" and
– a PDF documentation file suitable for the CentricStor Version m.n and the current
language setting is available.
In Service mode XTCC updates the local documentation if more recent documentation is
found on the remote CentricStor system in the event of connection setup ("Unit/Select") or
when changing the language setting ("Options Settings"). Here a more recent "Service
Manual (GUI Part)" has priority over an older "Service Manual (complete)". The user is
notified of this via a message window.
In Simu mode this function is not available; only the documentation available locally can be
taken into consideration.
Notes
– If no suitable "Service Manual" is available, the "User Guide" may be offered (see the
section "CentricStor User Guide" on page
– To enable the PDF documentation files to be displayed a suitable viewer program must
be installed on the local system (xpdf in SINIX, xpdf or Acrobat Reader in LINUX, Acrobat
Reader in WINDOWS).
– To save space XTCC automatically removes obsolete local files.
U41117-J-Z125-7-76
350).
Function bar
351