Fujitsu Siemens Computers pmn User Manual page 288

History data
time slice for PDS-scheduler
i
When you select only one cleaning PVG you are shown the following data:
Statistical data of the cleaning PVG:
PVG
Type
PVs
available/used cycles
TL
jobs (wait-work)
Then follows a list containing the data of the individual volumes.
288
Time in seconds for which a PDS remains assigned to a PV group. After this time
has elapsed an active job is terminated and the drive may be unloaded. Depending
on the load situation it is then assigned to another PVG.
The value must be greater than or equal to 600 seconds.
Assignment of the physical drives to the PVGs can be controlled by different sized
time slices. The larger the time slice of a PVG, the greater its share in the use of the
drives.
The layout of the subsequent list of PVs is the same as that described on
Name of the PVG
Type of the PVG
Number of PVs
Total avaialble/used cleaning cycles
Library in which the PVG is located
Pending/active cleaning runs
Global Status
page 219.
U41117-J-Z125-7-76