Unit; Select - Fujitsu Siemens Computers pmn User Manual

XTCC

8.3.2 Unit

8.3.2.1

Select

This function is disabled if XTCC is started from GXCC.
Otherwise, if XTCC was started directly, the "XTCC Unit Select" window is opened.
Example
The operation and functions of Unit Select are described in the
page 147. Errors during connection setup with "OK" are handled differently, however,
because in this case no connection exists as yet to a CentricStor.
U41117-J-Z125-7-76
Function bar
section "Select" on
335