Statistics » Physical Components - Fujitsu Siemens Computers pmn User Manual

History data
Meaning of the columns:
The job data (result for ... :) is output separately for each LVG.
pos
LVG
PVG 1
PVG 2
pending jobs
lv-size
7.6.2.10 Statistics » Physical Components
The following submenus are available:
– Physical Drives (see below)
– Physical Volumes
– Physical Volume Groups
– Jobs of Physical Vol. Groups
– Reorganization Status
i
276
Serial number
Name of the logical volume group
Name of the first assigned physical volume group
If '======' is specified as the name, no PVG is assigned to the LVG.
Name of the second assigned physical volume group
If '======' is specified as the name, only a single save is performed for the
LVG (no Dual Copy).
Number of jobs which have been accepted for this LVG
Size of the logical volumes:
STD Standard = 900 MB
EXT_x Extended: x specifies the volume size in GB (2, 5, 10, 20, 50,
100 or 200)
(page 279)
(page 291)
Notes on the refresh function:
All statistics functions support the refresh function:
After the function has been executed, i.e. after the result has been displayed in the
text window, the dialog window with the selection criteria (function window) is reta-
ined for further searches. The "OK" button at the lower edge of the function window
is replaced by the "Refresh" button, which enables the search to be repeated. The
search criteria can be modified before another search takes place.
The previous text window is then used to display the result, in which case the pre-
vious contents are deleted. The function window is closed only when the user clicks
on the "Cancel" button. In this case the text window with the result is also closed
implicitly.
(page 283)
(page 289)
Global Status
U41117-J-Z125-7-76