Fujitsu Siemens Computers pmn User Manual page 96

Starting GXCC
The table below lists the possible start parameters:
Parameter
-aspect
-autoscan
-display
-globstat
1
-lang
-multiport
-nointro
-observe
-profile <file>
-service
-simu <file>
-singleport
1
-size
-unit
96
Meaning
1
<param> Size and position of the main win-
dow on the screen
1
Cycle duration for updating the
main window
Host name/IP address of the
X terminal at which the window is
to be displayed
Activates the Global Status
Monitor
Language for helps. De | En
Connection via Info and/or
RequestBroker port
Splash screen suppression
Start in Observe mode
Name of the profile file (see the
section "Profile" on page
Start in Service mode
Simulation mode
Connection only via Request-
Broker port
n Size of the main window
Host name/IP address of the
CentricStor node to which GXCC
is connected after start-up
Operating and monitoring CentricStor
Comment
<param> has the format
[=][WxH]+|-X+|-Y
Width x height (pixels)
WxH:
Coordinates (pixels)
X,Y:
[*] * is optional
+ or -
+|-
Reduction of the data when
operating via Teleservice
Default: local X11 server
In the event of other defaults En is
set.
If not specified: Single Port con-
nection (see
Reduction of the data when
operating via Teleservice
If not specified: User mode
If this is not specified, GXCC will
191) be started with the default profile.
If not specified: User mode
<file> is the file generated in
GXCC/XTCC with File ➟ Save.
If not specified: Single Port con-
nection (see
Default value: 80%, 100%, 120%
If GXCC is running on a VLP, a
connection to the local InfoBroker
is established if nothing else is
specified. In all other cases, the
Unit Select menu is opened after
the program is started.
page 148)
page 148)
U41117-J-Z125-7-76