Function bar
8.3.6 Profile
The term "profile" encompasses all user-specific settings chosen under "Options" and
"Autoscan". These settings are stored in a user-specific subdirectory.
When the main menu functions
Unit ➟ Select
–
File ➟ Select
–
File ➟ Exit
–
Options ➟ Settings ➟ OK
–
Options ➟ Apply Current Aspect
–
Autoscan ➟ Settings ➟ OK
–
Profile ➟ Select ➟ OK
–
are called, the following settings which are used are backed up implicitly on a unit-specific
basis:
–
Options Settings
–
Autoscan Settings
–
and the current size and position of the window on-screen (aspect)
A backup operation does not take place if XTCC is terminated by some means other than
selecting File ➟ Exit.
i
i
344
Size, For Infobox: Move Pointer for Info / Click Button for Info,
Help in: English/German
Autoscan Delay, Mode: Manual/Self Adjusting, Scan on function
completion: Enable/Disable
Note that if you change the position or size of the window on the screen using the
Options ➟ Apply Current Aspect function you must confirm this.
The next time a unit is selected, the values that have already been stored are used
again. If the command line arguments -aspect, -autoscan, -lang, -size were
specified at the start, these will have priority over values which have already been
saved and, as described above, will also be saved implicitly.
XTCC
U41117-J-Z125-7-76