Fujitsu Siemens Computers pmn User Manual page 231

GXCC
Send mail at <hh:mm>:
This field is used to define the time (in hours and minutes) at which the accounting data
is to be sent by mail.
Default: 00:00
on <MM-DD>|<week day>:
Here the user can define the day on which the accounting data is to be sent by mail.
Format and default value: See above.
Mail subject:
Here you can enter the subject which is to be used when the mail lis sent. The system
may supplement the subject specified here by the suffix "(part <i> of <j>)" (see "Max.
lines per mail"), where <j> is the number of mails required to send the complete
accounting data and <i> is a consecutive number (starting with 1).
Default: Account Data
Max. lines per mail:
This number is used to define the maximum size of a mail. If the accounting data
comprises more than the number of lines specified here, the data is spread over more
than one mail. If the individual mails do not arrive at the receiving end in the order in
which they were sent, the recipient can reconstruct the original order of the mails using
the suffix "(part <i> of <j>)" in the subject (see: "Mail subject").
Default: 10000
Command buttons along the lower border
OK
Cancel
Reset
Help
U41117-J-Z125-7-76
Accepts the entries.
Closes the window without accepting the entries. All the entries made since the
last time the window was opened are thus lost.
All data is reset to the status when the window was opened. All the changes
made since the last time the window was opened are thus lost.
Opens a text window containing help information.
Function bar
231