Fujitsu Siemens Computers pmn User Manual page 281

Global Status
next-bl
LVs
val
cap/GB
valid/GB
valid %
If you have selected several cleaning PVGs, you will see the following overview:
U41117-J-Z125-7-76
s___ The PV must be scanned (used for transfer).
_v__ The PV is in "vault" state.
_w__ Write volume that can still be used for save operations.
_wd_ The cartridge is not yet full; currently there is no directory on the tape.
____ The state is unknown (used for Transfer-In).
Block number of the free range. This indicates the physical utilization level.
Number of saved logical volumes
Number of valid saved logical volumes; copies of volumes not included here are no
longer relevant.
Gross capacity without data compression. This is not specified for volumes prior to
initialization (State = new).
i
This value is only indicated if supplied by the drive. Otherwise the value 0 is
supplied.
Used capacity; volume of data actually stored. Due to data compresion this value
may exceed the total capacity (previous column).
i
This only takes into consideration the data compression of the physical
drive. The data compression of the device emulations is displayed in "Global
Status" along with the cache data. In many cases the compression
indicated by PLM is lower if the cache data has already been compressed.
The percentage of valid data.
History data
281