Fujitsu Siemens Computers pmn User Manual page 329

XTCC
SERV
80%
Autoscan Green = started
S 5s
n.me+op
Windows NT
m.n
The visual appearance of the main XTCC window is determined by the profile file. If you
close XTCC by selecting "File" ➟ "Exit", the current settings will be saved to the ISP profile
file currently active (processor- and user-specific) so that they are available again the next
time the application is started. If this is not desired, XTCC must be terminated using the
System function (icon at top left) or using the Windows Manager function ("X" box at top
right) (for details on this see the
The procedures for creating and managing profile files is described on
U41117-J-Z125-7-76
XTCC mode (OBSV=Observe, SERV=Service, USER=User,
SIMU=Simulation).
Current window size setting (in the example, 80%).
Yellow = active
Red flashing = stopped / temporarily disabled
White =blocked (SIMU mode)
Autoscan operating mode and interval (S = self-adjusting, M = manually
adjusted).
Read rate for InfoBroker data [n.m*10
using the transfer time of an InfoBroker record. When using a modem
connection, this value will also allow you to calculate the performance of the
connection.
Platform on which XTCC is running.
XTCC version number.
op
bytes/second]. The rate is calculated
section "Exit" on page
Margins of the main XTCC window
334).
page 344.
329