Open; Show; Print - Fujitsu Siemens Computers pmn User Manual

Function bar
6.2.2.2

Open

Opens a file selector window with which you can open a configuration that was generated
with "Save" (see above).
The window contains the field for entering the file name plus the following function keys:
OK
Browse
Help
Cancel
6.2.2.3

Show

Opens a file selector window for choosing a file which will then be displayed in the file
viewer.
6.2.2.4

Print

Prints a hardcopy of the main GXCC window excluding the "Print" menu. The print dialog
box is described in the
button must be used to create a hardcopy.
146
Checks whether the specified file is a valid GXCC configuration file and, if so,
outputs its contents in graphical format and is displayed in Simulation mode. If
not, an error message is output.
i
You can only exit the simulation mode by terminating the GXCC
program.
Opens a standard dialog box for searching for and selecting a file. The file type
is preset to *.gxd, and the file name is transferred to the entry field.
Instead of accepting the proposed file, you can click on any other .gxd file and
open it. If a .gxd file has been saved in a different directory then you can click
the button next to the directory bar to change to any higher-level and, therefore,
to any required directory.
Opens the GXCC help file.
Closes the window.
section "File" on page 299. In Windows systems the "Print" function
GXCC
U41117-J-Z125-7-76