Fujitsu Siemens Computers pmn User Manual page 519

Explanation of console messages
SXVL013 VLM(#13):ALERT: FATAL: database inconsistencies !
Meaning
Inconsistencies have occurred in the VLM data maintenance system.
Response
Notify maintenance staff!
SXVL014 VLM(#14): FATAL: more files in cache X than
Meaning
This message occurs only if the VLM is configured for cache only mode, for example if the
system was previously not configured for cache only mode and now the number of logical
volumes exceeds the limit which depends on the cache size.
Response
It is not possible to use a system in cache only mode if it was previously configured
differently. Notify maintenance staff.
SXVL015 VLM(#15): WARNING: no space in cache ???, reorganisation of
??? queued
Meaning
Reorganization for a logical volume has been queued because there is no more free space
available in the cache file system.
The error occurs when the data is not saved to tape quickly enough, e.g. in the event of
PLM/PLS/PDS errors or incorrect configuration (too few physical drives).
Response
If the error only occurs periodically it can be ignored. In any other case: notify maintenance
staff.
SXVL018 VLM(#18): ALERT: wrong DTV version: X.Y.Z (must be at least N.M.O)
Meaning
After an update installation the version of the DTV file system no longer matches the
existing software status.
Response
Notify maintenance staff.
SXVL019 VLM(#19): NOTICE: LVG <name>: Accepting single save
Meaning
In the specified LVG, LVs are only saved 1x because the conditions configured for this (e.g.
cache utilization level) are satisfied. This can occur when bottlenecks occur on the back
end, e.g. library failure, failure of all physical drives or lack of physical volumes.
Response
The bottlenecks mentioned must be cleared.
U41117-J-Z125-7-76
allowed: NNN (max. MMM)
Message lines
volume
519