Fujitsu Siemens Computers pmn User Manual page 511

Explanation of console messages
SXTF003 ERROR: dtv_ipalloc: dtv_ipsize too big, set to <val>
Meaning
The value of the Inode pool size that can be configured using space.c is invalid and is
replaced by the maximum permitted value. The result is that the maximum permitted value
is used.
Response
Notify maintenance staff.
SXTF004 WARNING: dtv_balloc(hd): not enough memory!
SXTF004 WARNING: dtv_binit: buffer pool allocation failed!
SXTF004 WARNING: dtv_binit: resource map allocation failed!
SXTF004 WARNING: dtv_irwopen: not enough memory!
SXTF004 WARNING: dtv_rdget() failed: not enough memory!
SXTF004 WARNING: dtv_readdir() failed: not enough memory!
SXTF004 WARNING: dtvinit() failed: not enough memory!
SXTF004 WARNING: dtvopen() failed: not enough memory!"
Meaning
Insufficient memory, serious operational problems with standstill/crash of the DTV system
in this processor.
Response
Notify maintenance staff.
SXTF004 WARNING: dtv_binit: illegal value <val> for variable <var>, use default <def>
SXTF004 WARNING: dtv_iocache_alloc: PG_ISVALID: ppte=<ppte>(<*ppte>)
SXTF004 WARNING: dtv_ipalloc: dtv_ipsize too big, set to <max>
Meaning
One or more of the following messages is output if illegal parameters are supplied to DTV
on start-up. Although this does not usually impair operation, the system will probably run
with settings different from the intended ones.
Response
Notify maintenance staff.
SXTF004 WARNING: dtv_binit: resource map allocation failed!
Meaning
The mapping information for the virtual volume could not be allocated. The host operation
will be rejected with "Medium Error". The error may be of a temporary nature.
It may be that memory size is too small or part of the working memory is defective and is
not recognized by BIOS.
Response
Notify maintenance staff.
U41117-J-Z125-7-76
Message lines
511