Line/Call Status - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Last Registration At
Next Registration In
Message Waiting
Mapped SIP Port

Line/Call Status

The following parameters show for each line and call on the phone.
Parameter
Call State
Tone
Encoder
Decoder
Type
Remote Hold
Callback
Peer Name
Peer Phone
Duration
Packets Sent
Packets Recv
Bytes Sent
Description
Last date and time the line was registered.
Number of seconds before the next registration
renewal.
Indicates whether the phone user has a new voice mail
waiting: Yes or No. This is updated when voice mail
notification is received.
Port number of the SIP port mapped by NAT.
Description
Status of the call.
Type of tone used by the call.
Codec used for encoding.
Codec used for decoding.
Direction of the call.
Indicates whether the far end has placed the call on
hold.
Indicates whether the call was triggered by a call back
request.
Name of the internal phone.
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
B
235